Lexibook ST5 Manuel d'utilisateur télécharger pdf

Congratulations! You have just purchased a Lexibook

Universal 5 in 1 Remote

Control.

Compatible with over 3000 brands of audio-visual product, this universal

remote

control combines the functions of several remotes: TV, Video Recorder (VCR),

Satellite

(SAT), DVD and Auxiliary (AV).

Caution:

Before its first use, you must set up the remote control so that it functions

with

your chosen audio-visual products. To do so, please read these

instructions

carefully.

There

are two programming modes: manual and automatic programming.

To programme manually, use the code specific to the manufacturer or brand of the

appliance

(4-digit code). Automatic programming is used when the specific codes are

unknown.

Manual Setting

1. Look up the four-digit code for your brand and type of equipment in the

code

tables on the following pages.

Press the key and Device key which you want to control at the same

time,

then the indicator light will turn on.

Press the four-digit code for your equipment. Each time LED blink one

time.

If the LED turn off, it indicates that the code is accepted.

Note:

1. If no key on your remote is pressed for 10 seconds, the programming

process

will stop automatically, and you will have to start over.

Exit the setting mode: Press any device key in the setting process.

LED

turnoff.

Note:

• The programming mode cancels out if you press buttons other than the digits.

• Try the remote control. If it does not work properly, try to programme it with other

codes.

• If your television has a video function (combined television/video) you must

programme

it by pressing the VCR button on the remote control.

Required programming procedure

Introduction

English

2. Quick Power Scan (Auto Find) Setting

1. Turn on the equipment you want the remote to control (TV, VCR, SAT

, etc.), and point the remote toward it.

Press the key and Device key (TV, VCR, SAT etc.) which you

want

to control at the same time, then the indicator light will turn on.

Press the key again, the indicator light will flash.

Press the once at a time (setup counter up) until the equipment turns

OFF.

The LED keeps flashing.

Note:

1. If no key on your remote is pressed for 30 seconds, the programming

process will stop automatically, and you will have to start over.

2. If the LED indicator is off on the setting mode, it stands for stop the

setting mode.

3. If the code is not match with your equipment, then repeat step 1 to 6.

Power Scan Concepts

1. During the power scan mode, if you press and hold key, the power

code data is transmitted continuously.

2. During the power scan mode, if you press and release , the power

code data is transmitted on time in reverse direction.

3. During the power scan mode, if you press and release Device key, the

current code data is selected.

How to test the selected code?

2. Press and Digital 1. LED will be flashing. The flashing time is stand

for

1st digit of the selected code. E.g.: Code=5476, Led will be flashing

5 times.

Press and Digit 2, LED will be flashing. The flashing time is stand

for

the 2nd digit of the selected code. E.g.: Code=5476, Led will be flashing

4 times.

4. Press and Digit 3, LED will be flashing. The flashing time is stand

for

the 3rd digit of the selected code. E.g.: Code=5476, Led will be flashing

7 times.

If LED will not be flashing, it stands for number 0.

5. Press and Digit 4, LED will be flashing. The flashing time is stand for

the 4th digit of the selected code. E.g.: Code 5476, Led will be flashing 6 times.

1. Select the device key in TV-added (TV, VCR, SAT, etc...).

If you have problems programming or using the remote control:

• Check whether the remote control is pointing directly at the appliance and that

there are no obstacles between the remote control and the appliance.

• Check whether you are pressing the correct button for the Television, VCR,

Satellite or DVD player for your choice of appliance.

• Check whether your appliance is designed to receive a remote infrared signal.

This product is covered by our two-year guarantee.

For all matters relating to the guarantee or our after-sales service, please contact your

retailer and have your receipt on hand. Our guarantee covers manufacturing or assem-

bly defects with the exception of all damage resulting from a failure to respect the ins-

tructions,

or any inappropriate handling of the article (such as taking it apart, exposing

it to heat or humidity, etc).

Freephone customer service: 0808 100 3015

Customer service address: Wolfe Lodge, Bordon, Hants GU35 ONH

Website: www.lexibook.com

Warranty

Troubleshooting

5. If the LED blink 2 times and then on, it indicates that the code is wrong.

If the first code in the list for your appliance do not work, try every code

one

after the other for your appliance.

You need exit the set ting modes

and

restart the process.

If these codes does not work, try setting Auto

Scan procedure

(automatic programming).

6. Try different keys on your remote control for the equipment you wish to

control. If you manage to control it, press the appropriate key for that

equipment (TV, VCR, SAT, etc.), indicator

should flash and turn off to

indicate

that the code is accepted.

If you do not manage to control your equipment, restart the procedure from

step 4.

Résumé du contenu

Page 1 - Troubleshooting

Congratulations! You have just purchased a Lexibook®Universal 5 in 1 RemoteControl. Compatible with over 3000 brands of audio-visual

Commentaires sur ces manuels

Pas de commentaire

Lexibook ST5 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Contrôle à distance Lexibook ST5. Lexibook ST5 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Contrôle à distance Lexibook ST5